Part #RCS-80V Type G
Constant Spring
The RCS-80V “TYPE G” is manufactured using opposing constants and a pair of channels welded back to back, to form a trapeze assembly. This RILCO system is designed for use when a pipe is not to be centered on the constant support so that one spring of the trapeze carries a heavier load than the other. Available in most types of finishes.
anger Sizes | L | D | E | F | M | N | P | Q | V | Y | Channel | C-C | Total Travel (in.) | Factors | A | ||||
10-18 | 18 7/8 | 8 7/8 | 1 | 2 | 8 5/8 | 6 7/8 | 2 9/16 | 3 1/2 | 5 13/16 | 4 | 4@ 5.4 | 30 | ≤ 5 | 11 11/16 | 3/4 | ||||
>5 1/2 | 14 | ||||||||||||||||||
19-34 | 28 1/2 | 16 | 1 1/4 | 2 1/8 | 12 3/4 | 8 9/16 | 3 9/16 | 4 | 9 | 6 1/8 | 6 @ 10.5 | 42 | ≤ 5 | 16 13/16 | 1 1/4 | ||||
>5 1/2 | 18 3/4 | ||||||||||||||||||
35-49 | 32 3/4 | 18 1/4 | 1 1/2 | 4 3/4 | 14 | 9 13/16 | 3 7/16 | 5 1/2 | 10 3/4 | 8 | 10 @ 15.3 | 48 | ≤ 6 | 19 1/4 | 1 3/4 | ||||
>6 1/2 | 23 7/8 | ||||||||||||||||||
50-63 | 46 7/8 | 28 1/8 | 2 1/8 | 8 5/16 | 18 | 11 1/4 | 4 | 6 1/2 | 14 3/4 | 10 15/16 | 12 @ 20.7 | 48 | ≤ 11 | 24 5/8 | 2 1/4 | ||||
>11 1/2 | 30 | ||||||||||||||||||
64-110 | Not Available | ||||||||||||||||||
A-Rod Selection Chart | |||||||||||||||||||
Loads (lbs) | 0 | 801 | 1501 | 2541 | 4001 | 6101 | 9401 | 13401 | 18301 | ||||||||||
A Rod Size | 1/2 | 5/8 | 3/4 | 1 | 1 1/4 | 1 1/2 | 1 3/4 | 2 | 2 1/4 |
Please fill out the form below and a Rilco representative will be in contact with you shortly.
Copyright 2024 © Rilco Manufacturing Company All Right Reserved